|
|
| |
| RONA |
Rona |
Large Rona Pewter (French) Pin |
|
Back Stamp: |
TM © 2005, COC, USD UNDER LICENSE |
| Fastener: |
Double Tack Back |
| Description: |
Raised enamel. It has a Pewter finish w/ C.O.C. logo RONA Partenaire national Partner. It is the first French language pin produced for the 2010 Vancouver Olympic Games. This pin is the first pin produced by Rona for their employees in Quebec only. |
1 3/4" H x 1 1/16” W |
Rating: 9.5 |
Approx. 1,000 produced |
Hunting for this pin |
Rona1 |
Large Rona Pewter Pin |
|
Back Stamp: |
TM © 2005, COC, USD UNDER LICENSE |
| Fastener: |
Double Tack Back |
| Description: |
Raised enamel. Pewter finish w/ C.O.C. logo RONA National Partner |
1 3/4" H x 1 1/16" W |
Rating: 8 |
Approx. 1,000 produced |
Hunting for this pin |
RONA 1A |
Large Rona Pewter Ilanaq Pin |
|
Back Stamp: |
TM© 2005, VANOC, Used under Licence. |
| Fastener: |
Tack Back |
| Description: |
Raised Enamel. This pin was produced before the VANOC had chosen Artiss/Aminco as the Official Pin Licensee It is the second pin produced by RONA. It was produced specifically for the opening of 2 new stores, one in Richmond BC and one on Vancouver Island. The Richmond BC location has already closed. This pin is the Holy Grail of corporate pins. |
1 3/4 " H x 1 1/16" W |
Rating: 10+ |
Approximately 250 produced |
Hunting for this pin |
Rona2 |
Rona COC 2010 Pin |
 |
Back Stamp: |
CHINA, TM/MC © 2005, VANOC/COVAN, ARTISS AMINCO |
| Fastener: |
Tack Back |
| Description: |
Raised enamel. |
1 1/8" H x 3/4" W |
Rating: 5 |
Approx. 5,000 produced |
Hunting for this pin |
Rona3 |
Rona OOC Paralympic Pin |
 |
Back Stamp: |
CHINA, TM/MC © 2005, VANOC/COVAN, ARTISS AMINCO |
| Fastener: |
Tack Back |
| Description: |
Raised enamel. |
1 1/8" H x 3/4" W |
Rating: 5 |
Approx. 5,000 produced |
Hunting for this pin |
Rona4 |
Rona VANOC Logo Pin |
 |
Back Stamp: |
CHINA, TM/MC © 2005, VANOC/COVAN |
| Fastener: |
Tack Back |
| Description: |
Raised enamel. The pin’s background has a bluish tinge. |
1 1/8" H x 3/4" W |
Rating: 7 |
Approx. 2,000 produced |
Hunting for this pin |
Rona4a |
Rona VANOC Logo Pin |
 |
Back Stamp: |
CHINA, TM/MC © 2005, VANOC/COVAN |
| Fastener: |
Tack Back |
| Description: |
Raised enamel. Bright white background |
1 1/8" H x 3/4" W |
Rating: 5 |
Approx. 5,000 produced |
Hunting for this pin |
Rona5 |
Rona Miga Mascot Pin |
 |
Back Stamp: |
TM/MC © 2007, VANOC/COVAN, LTD. ED./ED.LM., MASCOT
LAUNCH’07, LANG. MASCOTTE 2007, ARTISS AMINCO, CHINA/CHINE |
| Fastener: |
Tack Back |
| Description: |
Cloisonne. This was the first mascot pin produced by Rona. They are very limited. |
1 1/8" H x 1 3/8" W |
Rating: 9 |
Approx. 500 produced |
Hunting for this pin |
Rona6 |
Rona Quatchi Pin |
 |
Back Stamp: |
TM/MC © 2007, VANOC/COVAN, LTD. ED./ED.LM., MASCOT
LAUNCH’07, LANG. MASCOTTE 2007, ARTISS AMINCO, CHINA/CHINE |
| Fastener: |
Tack Back |
| Description: |
Cloisonne. This was the first mascot pin produced by Rona. They are very limited. |
1 3/8" H x 1 1/2" W |
Rating: 9 |
Approx. 500 produced |
Hunting for this pin |
Rona7 |
Rona Sumi Pin |
 |
Back Stamp: |
TM/MC © 2007, VANOC/COVAN, LTD. ED./ED.LM., MASCOT
LAUNCH’07, LANG. MASCOTTE 2007, ARTISS AMINCO, CHINA/CHINE |
| Fastener: |
Tack Back |
| Description: |
Cloisonne. This was the first mascot pin produced by Rona. They are very limited. |
1 1/8" H x 1 3/8" W |
Rating :9 |
Approx. 500 produced |
Hunting for this pin |
Rona8 |
Rona Construction Hardhat Pin |
 |
Back Stamp: |
TM/MC © 2008, VANOC/COVAN, ARTISS AMINCO, CHINA /CHINE |
| Fastener: |
Tack Back |
| Description: |
Raised enamel w/domed epoxy. This pin was produced for a specific event and here are very few in circulation. |
7/8" H x 1 1/4" W |
Rating: 10 |
3000 produced |
Hunting for this pin |
Rona9 |
RONA Affiliate Curtis Lumber Pin |
 |
Back Stamp: |
CHINA, TM/MC © 2007, VANOC/COVAN, ARTISS AMINCO |
| Fastener: |
Tack Back |
| Description: |
Raised Enamel. This pin was produced for one of Rona’s sister companies, Curtis Lumber. They are relatively rare. |
1 1/8" H x 13/16" W |
Rating: 6 |
Approx. 1,000 produced |
Hunting for this pin |
Rona10 |
Rona Building Canada’s Games Pin |
 |
Back Stamp: |
TM/MC © 2008, VANOC/COVAN, ARTISS AMINCO® |
| Fastener: |
Tack Back |
| Description: |
Cloisonné w/ Screen Print. This pin was produced in very small numbers for Rona. It was produced for their employees and students that are working on the Vancouver 2010 Olympic Games venues and their fabrication shops. They are very limited. |
1 1/8" H x 1 1/4" W |
Rating: 9.5 |
Approx. 1000 produced |
Hunting for this pin |
Rona11 |
Rona 2010 Fabrication Shop Pin |
 |
Back Stamp: |
TM/MC © 2008, VANOC/COVAN, ARTISS AMINCO® |
| Fastener: |
Tack Back |
| Description: |
Cloisonné w/ Screen Print. This pin was produced in very small numbers for Rona. It was produced for their employees and students that are working on the Vancouver 2010 Olympic Games venues and their fabrication shops. They are very limited.
|
1 1/8" H x 1 1/4" W |
Rating: 9.5 |
Approx. 1000 produced |
Hunting for this pin |
Rona11 |
Rona Dragon 2008 – 2010 Bridge Pin |
 |
Back Stamp: |
TM/MC © 2008, VANOC/COVAN, ARTISS AMINCO® |
| Fastener: |
Tack Back |
| Description: |
Cloisonné w/ Screen Print. This pin was produced for Rona for the Beijing Olympic Games. These pins were given to members of the Rona team that went over to Beijing and also used for a function held for Chinese Canadians in Vancouver. This stunning pin is very large and truly is a keeper. They are very limited and are few and far between. |
1 1/8" H x 1 3/8" W |
Rating :9 |
Approx. 1,000 produced |
Hunting for this pin |
|
|
|
This website is not endorsed by, nor is it affiliated or connected with the 2010 Vancouver Olympics, Canadian Olympic Committee (COC), International Olympic Committee (IOC) or VANOC. The Pin Collectors Website is for the purpose of trading, information sharing and dissemination of pins produced for the 2010 Vancouver and past Olympics |
|
